1.5HP 333′ DEEP WELL PUMP
Case Weight (lb) 39
Description 1.5HP 333′ DEEP WELL PUMP
Specification 110V 60Hz, 1.5hp Motor
Brass Outlet (Discharge): 1-1/4″
Industrial Standard, Stainless Steel Body
2.5gpm at 300′, 5gpm at 275′, 7.5gpm at 220′, 10gpm at 88′, 10.6gpm at 10′
Max Depth: 333’Operating conditions:
-Liquid temperature up to 40 o C
-Submersion depth 40m
-Minimum internal diameter of well: 102mm.
-Tow-pole induction motor (n=3850r.p.m)
-Built-in over load motor protector
-Insulation Class B/F
-External pump body: Stainless Steel
-Suction strainer: Stainless Steel
-Impeller and diffusors: Noryl
-Bearing brackets: Brass
-Shaft: Stainless Steel
-Motor housing: Stainless Steel
-Mechanical seal: Ceramic/Graphite
-Multistage submersible water pumps with radial closed impeller conceived in order to solve any problem of clean water conveyance.
-Suitable for irrigation, and pressure systems and pressure systems and generally for civil and industrial purposes.
For water supply from wells or reservoirs, domestic use, civil and industrial applications and for garden use and irrigation.
Industrial standard, stainless steel housing
Brass outlet (discharge): 1-1/2″
1.5 hp 1100W, 3450 RPM
Comes with control box featuring: manual On/Off switch, motor overload/thermal protection, 20uf/450v capacitor in the box.
100 ft wire included
Max dept: 333FT (90M)